Syagro Kisan Tools Private Limited

Module description: 1. The module uses genuine high-quality relays, the maximum load of the normally open interface: AC 250V/10A, DC 30V/10A; 2. Using SMD optocoupler isolation, strong driving ability and stable performance; trigger current 5mA; 3. The working voltage of the module is available in 5V, 9, 12V and 24V; 4. The module can set high-level or low-level trigger by jumper; 5. Fault-tolerant design, even if the control line is broken, the relay will not act; 6. Power indicator (green), relay status indicator (red) 7. The interface design is user-friendly, all interfaces can be directly led out through the wiring terminals, which is very convenient 8. Module size: 50mm * 26mm * 18.5mm (length * width * height) 9. There are 4 fixing bolt holes, the hole is 3.1mm, the spacing is 44.5mm*20.5mm Module interface: 1. DC+: Connect to the positive pole of the power supply (the voltage is in accordance with the requirements of the relay, and there are 5V, 9V, 12V and 24V options) 2. DC-: Connect to the negative pole of the power supply 3. IN: the relay can be controlled to pull in at high or low levels Relay output: 1. NO: Normally open interface of the relay, the relay hangs before pull-in, short-circuit with COM after pull-in 2. COM: Relay common interface 3. NC: Normally closed interface of the relay. The relay is short-circuited with COM before pull-in and hangs up after pull-in.